Protective goggles

Reusable goggles


Cleanroom goggles are protective goggles which are designed to protect particulate and microbiologically controlled areas from contamination emitted by the wearer, like cleanroom garments.

However, they are neither PPE articles nor optical spectacles.

On request, we can replace the adjustable straps on some goggles with a belt strap to reduce the pressure the straps exert!

Replacement lenses and tapes on request!

Model selection

The model variety of cleanroom safety goggles has increased significantly due to growing importance and regulatory requirements. Typical differentiation criteria are:

Cleanroom protection goggles with direct ventilation

Here the air can reach the lenses inside unhindered, usually from above. A major advantage: the lenses fog up less. Disadvantage: Contamination can escape unhindered via the large openings.

Cleanroom protection goggles with indirect ventilation

With these frame constructions, the air only enters the goggles via "detours". The risk of contamination, e.g. hair or skin scales escaping, is thus significantly lower. However, these goggles often fog up more quickly. But then, when cleaning overhead with detergents or disinfectants, they offer significantly better protection against the unwanted entry of liquids.

Cleanroom protection goggles with anti-fogging equipment

Especially for protection goggles with indirect ventilation, goggles lenses with special coatings against fogging are recommended. However, these lenses with such special options have to be replaced more frequently, as the coatings are affected more quickly by the cleaning, disinfection or sterilisation processes.

Important parameters for the evaluation of the individual suitability of cleanroom protection goggles are amongst others:

  • ventilation system in the frame

  • surface treatment for lense (e.g. anti-fog and scratch-resistant)

  • autoclavability

  • tendency to deform

Reusable Protective Goggles

Description

Description

Coating

Colour

Sterile

SUPBLCLAVE

indirect ventilation

Lens made of polycarbonate, suitable for prescription glasses/half face mask, upper drain channel, adjustable headband attached to ball studs, autoclavable 30 cycles

anti-fog /

scratch proof

white

no

COVACLAVE

indirect ventilation

Lens made of polycarbonate, suitable for use with prescription glasses, drain channel for liquids, adjustable headband on loop holder, autoclavable 30 cycles

anti-fog /

scratch proof

white

no

uvex ultrasonic CR

indirect ventilation

Suitable for use with prescription glasses, continuously adjustable headband, exchangeable lens, autoclavable 10 cycles

anti-fog

white

no

Univet® 611.S0.00.01

direct ventilation

Elastic headband made of antistatic silicone, autoclavable 40 cycles

anti-fog /

scratch proof

blue

no

Univet® 611.S1.00.01

direct ventilation

Elastic headband made of antistatic silicone, autoclavable 10 cycles

anti-fog /

scratch proof

blue

no

BioClean Clearview™

BCAP

direct ventilation

Suitable for use with prescription glasses, very soft frame, special elastic band adjustable with PP hook, autoclavable 40 cycles

anti-fog /

scratch proof

white

no

ELITE AUTOCLAVE ELATPR

direct ventilation at the top,

indirect at the bottom

Elastic headband made of isoprene, autoclavable 30 cycles

anti-fog /

scratch proof

white

no

ELITE AUTOCLAVE ELATPR2

direct ventilation top, sealed bottom

Elastic headband made of isoprene, autoclavable 30 cycles

anti-fog /

scratch proof

white

no

ELITE AUTOCLAVE ELATPRS

direct ventilation top, sealed bottom

For small faces, elastic band made of isoprene, autoclavable 30 cycles

anti-fog /

scratch proof

white

no